Organized Living freedomRail File Drawer OBox Assembly Instructions

Contents of Package

Left Side
of OBox
(Inside View)
File Drawer
Left Side
Small
Drawer
Left
Side
(12)
(32) Euroscrews

Assembling the File Drawer OBox

Step 1: Attach Hanging Brackets

Left Side
Back Edge
Attach Hanging Brackets to Sides using Euroscrews. (If using power drill, set torque to low setting.)

Step 3: Attach Sides

Lock
(a) Attach Sides to Bottom. (b) Lock Cam by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Assembly Instructions
File Drawer OBox
Right Side
of OBox
(Inside View)
File Drawer Back
(Inside View)
Small Drawer Back
(Inside View)
Drawer Bottom
Small Drawer Front
File Drawer Front
(4) 1 / " Wood Screws
Connector Bolts
Back Edge
Cam
Open
Bottom
(Inside View)
Top
(Inside View)
File Drawer (2) Drawer Pulls
Right Side
(4)
Small
Drawer
Right
Side
(4) Full Extension Drawer Glides
(2) File Folder Bars
O-Ring
Hanging
(2)
Brackets

Step 2: Install Connector Bolts

Right Side
Install (4) Connector Bolts into small holes on Top and Bottom.

Step 4: Attach Top and Locking Mechanism

O-Ring
(a) Attach Top. (b) Tighten Cams same as in Step 3.
(c) Place O-Ring over Lock from top and attach Lock with (2) Euroscrews.
Over

Tools Required

Machine Screws
(For Drawer Pulls)
Lock and Key
Bottom
Smaller Holes for
Connector Bolts
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Top
1