Organized Living freedomRail 2 Drawer Double Hang Big OBox Assembly Instructions

Contents of Package
(2) Drawer Pulls
Machine Screws
(4)
(For Drawer Pulls)
(2) Full Extension Drawer Glides
(2) Drawer Backs
(2) Drawer Bottoms
(2)
Drawer
Left
Sides
(2) Drawer Fronts
Assembling the 2 Drawer Double Hang Big OBox
Step 1: Attach Hanging Brackets
Left Side
Back Edge
Attach Hanging Brackets to sides using Euroscrews. (If using Power Drill, set torque to low setting.)
Step 3: Attach Sides
Lock
(a) Attach Sides to Bottom. (b) Lock Cam by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Assembly Instructions
2 Drawer Double Hang Big OBox
Left Side
Right Side
Back Edge
Cam
Open
Bottom
Top
(26) Euroscrews
(4) 1 / " Wood Screws
(2)
Drawer
Right
Sides
Connector Bolts
(12)
(2) Hanging
Brackets
Step 2: Insert Connector Bolts
Right Side
Insert (4) Connector Bolts into small holes on Top and Bottom Panels.
Step 4: Attach Top
(a) Attach top. (b) Tighten Cams same as in Step 3.
Over
Tools Required
#2 Phillips
Screwdriver
#2 Phillips Driver
Bottom
Smaller Holes for
Connector Bolts
Power Drill
Top
1