Gardena THS Li-18/42 Operator's Manual page 4

EN
Translation of the original instructions.
For safety reasons, children and young people under the age
of 16, as well as people not familiar with these operating
instructions, may not use this product. Persons with reduced
physical or mental abilities may use the product only if they are supervised
or instructed by a responsible person. Children must be supervised to
ensure that they do not play with the product.
Intended use:
This GARDENA Telescopic Accu Hedge Trimmer is intended for the cut-
ting of hedges, shrubs and grass coverings in private domestic gardens
and allotments.
Adherence to these operating instructions is a precondition for the correct
use of the hedge trimmer.
DANGER! Risk of injury! The hedge trimmer must not be used
for cutting lawns / lawn edges or for chopping up material for
composting purposes.
8
1. SAFETY
IMPORTANT!
Read the operator's manual carefully before use and keep for future
reference.
If not used properly this product can be dangerous. The warnings and
safety instructions must be followed to ensure reasonable safety and
efficiency in using this product. The operator is responsible for follow-
ing the warnings and instructions in this manual and on the product. Never use
the product unless the guards provided by the manufacturer are in the correct
position.
Symbols on the product:
WARNING!
Read the user instructions carefully to make sure
you understand all the controls and what they do.
Risk of fatal injury due to electric shock!
Keep at least 10 m away from electricity lines.
Danger – Keep hands away from blade.
Always wear eye and ear protection.
Do not expose to rain.
Do not leave the product outdoors while it is raining.
General Power Tool Safety Warnings
WARNING ! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and / orserious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
EPower tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adaptor plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard had,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off­position
before connecting to power source and / or battery pack, picking up or
carrying the tool.