Mitsubishi Electric EcoMonitorPro EMU2-RD3-F Instruction Manual page 27

Item
Terminal tightening torque
Mass
External dimensions (W×D×H) in
mm
Expected product life
Note 1 : 110 V and 220 V circuits can be connected directly. An external potential transformer is necessary for circuits of 440 V or
more.
Note 2 : When the 5A sensor is used, the primary current can be set to the following values.
5A, 6A, 7.5A, 8A, 10A, 12A, 15A, 20A, 25A, 30A, 40A, 50A, 60A, 75A, 80A, 100A, 120A, 150A, 200A, 250A, 300A, 400A,
500A, 600A, 750A, 800A, 1000A, 1200A, 1500A, 1600A, 2000A, 2500A, 3000A, 4000A, 5000A, 6000A, 7500A, 8000A,
10000A, 12000A, 20000A, 25000A, 30000A
Note 3 : "168 hours" is the compensation time for continuous energized condition for 1 hour or more.
Note 4 : The unit has one clock common to the circuits.
0.49 to 0.78 N⋅m
EMU2-RD3-F ------------------------------- 0.6kg
EMU2-RD5-F ------------------------------- 0.8kg
EMU2-RD7-F ------------------------------- 1.0kg
EMU2-RD3-C ------------------------------ 0.6 kg
EMU2-RD5-C ------------------------------0.8 kg
EMU2-RD7-C ------------------------------1.0 kg
EMU2-RD3-F -------------------------------90×97×98
EMU2-RD5-F -------------------------------127.5×97×98
EMU2-RD7-F -------------------------------165×97×98
EMU2-RD3-C ------------------------------115×97×98
EMU2-RD5-C ------------------------------152.5×97×98
EMU2-RD7-C ------------------------------190×97×98
10 years
(27/32)
Specification
EMU2-RD2-F-4W ------------------------ 0.5kg
EMU2-RD4-F-4W ------------------------ 0.7 kg
EMU2-RD2-C-4W ------------------------ 0.5kg
EMU2-RD4-C-4W ------------------------ 0.7 kg
EMU2-RD2-F -------------- 90 x97x98
EMU2-RD4-F -------------- 127.5x97x98
EMU2-RD2-C -------------- 115×97×98
EMU2-RD4-C -------------- 152.5×97×98