Transport; Storage; Functional Description - Abicor Binzel ALPHA FLUX 350 Operating Instructions Manual

5 Functional Description

4.1 Transport

Checking procedure
on receipt of goods
In case of complaints
Packaging for
returning the goods
Tab. 7 Transport

4.2 Storage

5 Functional Description
EN - 6
parts and wear parts lists. The contact for consulting and ordering can be found
in the Internet at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed environment:
 See Tab. 1 Ambient temperature on page EN-3
The functioning FCAW welding torch comprises the following components:
• Torch neck with equipment parts and wear parts
• Handle with or without switchover contact
• Coaxial cable
• Machine connections KZ-2 or LN
For welding, a wire electrode is fed through the welding torch system. The arc
and the molten pool are protected by gases formed by combustion of the
additional materials contained in the flux-cored wire.
The wire electrode is a melting fluxed-core wire fed through the contact tip. The
contact tip transfers the welding current to the wire electrode. The arc is formed
between the wire electrode and the part. In all designs, the torch neck is air-
cooled, and the welding torch has the same design.
The standard torch neck is bent by 65 °. Special models also being available
as options. An aluminum hand shield protects the handle with integrated
button. An additional switch can be mounted laterally. The wire layout can be
replaced.
ALPHA FLUX