Error Messages And Troubleshooting - Omron Evolv BP7000 Instruction Manual

5. ERROR MESSAGES AND TROUBLESHOOTING

5.1 Error Messages
Error Display Cause
Irregular heartbeat is
detected.
Movement during
measurement.
The batteries are low.
The batteries are
depleted or battery
polarities are not
properly aligned.
Connection failure. Data
is not being transmitted.
Arm cuff is applied too
loosely.
25
Solution
Remove the arm cuff. Wait 2
- 3 minutes and then take
another measurement.
Repeat the steps in
section 2.2. If this error
continues to appear, contact
your physician.
Carefully read and repeat the
steps in section 3.1 or 4.2.
Recommend replacement of
all 4 batteries with new ones.
Refer to section 2.1.
Immediately replace 4
batteries with new ones.
Refer to section 2.1.
Confirm the batteries are
properly inserted with
polarities correctly aligned.
Refer to section 2.1.
Refer to" Connection failure. /
Data is not being
transmitted." in section 5.2.
Apply the arm cuff tighter.
Refer to section 2.2.