Sg20B Charge Base Instructions - Intermec SG20B Instructions Manual

SG20B Charge Base Instructions

These instructions explain how to install and use the SG20B
charge base.
See the SG20B Charge Base Compliance Insert for use
restrictions associated with this product.
Connecting Power
You need one of the following cables sold and ordered separately:
•
•
Note: The host USB port must deliver 500 mA to power the
charge base. If you have a message that the host does not
provide enough power use a different USB hub or disconnect
other USB devices.
SG20B Charge Base Instructions
DC power supply (P/N 851-089-xxx), which requires a
country-specific power cord, or
A standard USB cable
3