Advertisement
Quick Links
INTERFACE COMPONENTS
• AX-DSP-A2B1 interface
• AX-DSP-A2B1 harness
• AX-DSP-A2B1 interface harness (male connectors: 12-pin, 16-pin)
• Amplifier bypass harness (female connectors: 16-pin, 16-pin)
• AX-BASSKNOB
APPLICATIONS
Ford
Escape
2017
Fusion
AxxessInterfaces.com
Ford A2B Data Interface with Amplifier
Bypass Harness & DSP 2017
INTERFACE FEATURES
• Designed for Sony A2B
amplifiers
• A2B data interface with AX-DSP-X
(digital signal processor) built-in
• Includes an amplifier bypass
harness
• Retains factory chimes including
parking sensor chimes
2017
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
AX-DSP-A2B1
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Troubleshooting .....................................................4
• Retains SYNC voice prompts
• All chimes/voice prompts
go through the aftermarket
amplifier and/or cluster
• Adjustable chime level
TOOLS REQUIRED
• Micro-B USB updatable
• Crimping tool and connectors, or solder gun,
• Zip ties
Product Info
solder, and heat shrink • Tape • Wire cutter
REV. 10/17/19 INSTAX-DSP-A2B1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Axxess AX-DSP-A2B1
Summary of Contents for Axxess AX-DSP-A2B1
- Page 1 • Tape • Wire cutter INTERFACE COMPONENTS • Zip ties • AX-DSP-A2B1 interface • AX-DSP-A2B1 harness • AX-DSP-A2B1 interface harness (male connectors: 12-pin, 16-pin) Product Info • Amplifier bypass harness (female connectors: 16-pin, 16-pin) • AX-BASSKNOB APPLICATIONS Ford...
- Page 2 E-123, must be used if the amp turn-on CH 6-10 To Be Used AX-BASSKNOB current of all amps exceed 1 amp For Optional Amps AX-DSP-A2B1 USB Connector From Interface Factory Amp Yellow/Brown - Subwoofer Right + Green/Purple - Subwoofer Right -...
- Page 3 7. Connect the amp turn-on wire from the AX-DSP-A2B1 harness. 8. Click the Identify button to confirm that the AX-DSP-A2B1 is connected properly. If so, a chime will be heard from the front left speaker or gauge cluster. Test all functions of the installation for proper operation.
- Page 4 Contact our Tech Support line at: 386-257-1187 • If the Red light in the AX-DSP-A2B1 interface is blinking, it is not communicating to the vehicle. Remove the key from the Or via email at: ignition, unplug the connectors from the interface, then inspect all connections made. If everything is proper, connect the techsupport@metra-autosound.com...
Need help?
Do you have a question about the AX-DSP-A2B1 and is the answer not in the manual?
Questions and answers