Garmin GTX 330 System Maintenance Manual page 52

A 7. POST INSTALLATION CONFIGURATION LOG
GTX 330 Post-Installation Configuration Log
Date:
By:
#1 Unit P/N:
#2 Unit P/N:
Installation Settings (All settings in this section must be the same for each installed transponder)
Field
Voice Setting
Message
Count Down Timer
Traffic Messages
BKLT
RSP Time
If MAN selected as BKLT source above, the additional
fields below must be configured
Level
Min
BKLT Source
Slope
Offset
Contrast Mode
Arinc 429 Configuration
Port 1
Port 2
Port 3
Port 4
Port 1
GTX 330/33 with ADS-B Out
Maintenance Manual with ICA
The document reference is online, please check the correspondence between the online documentation and the printed version.
Aircraft Model:
Aircraft Serial #:
#1 Unit Serial #:
#2 Unit Serial #:
CONFIGURATION ITEMS
Setting
Transponder #1
Input Speed
Transponder #2
Input Speed
A-8
Aircraft
Registration:
HEX Address:
Aircraft Make:
Field
Volume
Altitude Monitor
Page Change
Display Mode / Level
KEY
RSP Time
If MAN Selected as KEY source above, the additional fields
below must be configured
Level
Min
KEY Source
Slope
Offset
VFR Key Configuration
Output
N/A
N/A
Output
Setting
/
Speed
Speed
190-00734-11
Rev. 1