6.2
GTX 33/33D
Removal:
1. Gain access to the transponder.
2. Unlock the GTX 33/33D handle by loosening the Phillips screw on the handle.
3. Pull the handle upward to unlock the GTX 33/33D. Gently remove the unit from the rack.
Reinstallation:
1. Visually inspect the connectors to ensure there are no bent or damaged pins. Repair any damage.
2. Gently insert the GTX 33/33D into its rack. The handle should engage the dogleg track.
3. Press down on the GTX 33/33D handle to lock the unit into the rack.
4. Lock the handle to the GTX 33/33D body using the Philips head screw.
190-00734-11
Rev. 1
The document reference is online, please check the correspondence between the online documentation and the printed version.
Figure 11. GTX 33 Mounting Rack/Connector Assembly
GTX 330/33 with ADS-B Out
Maintenance Manual with ICA
6-3