6.3
TRANSPONDER ANTENNA
Removal:
1. Gain access to the antenna coaxial cable connector and mounting hardware. Refer to A 2 for
antenna location.
2. Disconnect the antenna coaxial cable.
3. Remove the hardware securing the antenna.
4. Remove antenna.
Reinstallation:
1. Install antenna using retained hardware.
2. Connect the antenna coaxial cable.
3. Test the GTX according to Section 8.4.
GTX 330/33 with ADS-B Out
Maintenance Manual with ICA
The document reference is online, please check the correspondence between the online documentation and the printed version.
6-4
190-00734-11
Rev. 1