Warning Led Status Conditions; Critical Led Status Conditions - Dell EqualLogic PS6010 Hardware Maintenance
Storage arrays
Hide thumbs
Also See for EqualLogic PS6010:
- Hardware manual (50 pages) ,
- Quick reference manual (2 pages)
Table of Contents
Advertisement
PS6010 Hardware Maintenance
Table 1-2: Operations Panel Descriptions (Continued)
Callout
Item
Serial number label
Warning LED Status Conditions
When the Warning LED is flashing orange, one or more of the following has
occurred:
•
RAID set is degraded but still functioning.
•
RAID set (volume level) has lost blocks.
•
Component temperature is near a limit.
•
Fan failed or fan RPMs exceed limit.
•
Power supply is not installed or has no power.
•
Cache battery has less than 72 hours of charge.
•
Only one control module installed or control module has failed over.
•
Control module has insufficient RAM.
•
Syncing active and secondary control modules.
•
No communication between control modules.
•
Installed spare disk drive does not have enough capacity to replace a disk
drive in a RAID set.
•
A non-critical hardware component failed.
•
Real-time clock battery is low.
Critical LED Status Conditions
When the Critical LED is flashing orange, one or more of the following has
occurred:
•
RAID is not functioning.
•
Lost block table is full.
1–4
Color
Description
N/A
This label contains the serial number
for your array. If you contact your
PS Series support provider, you may
need to provide this number.
Basic Array Information
Advertisement
Table of Contents
