Programming The Central Water Filtration System; Set Time Of Day - Whirlpool WHELJ1 Installation And Operation Manual

Programming the Central Water Filtration System

Display
CLEAN
button
If you have questions about installation, program-
ming, operating and routine maintenance...
call 1-866-986-3223, Monday - Friday, 8 am to 9 pm,
EST.
When the transformer is plugged into the electrical outlet,
a model code and a test number (example: J1.3), begin
to flash in the faceplate display. Then, 12:00 PM and the
words "PRESENT TIME" begin to flash.
NOTE: If "- - - -" shows in the display, press the
DOWN button until "CF 8" shows in the dis-
play. Then, press the PROGRAM button to set,
and change to the flashing "PRESENT TIME" dis-
play.

SET TIME OF DAY

If the words "PRESENT TIME" do not show in the display,
press the PROGRAM button until they do.
1. Press the UP or
ent time. Up moves the display ahead; down sets the
time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down for
fast advance.
2. Press the PROGRAM button a few times, until the time
appears on the display, but is not flashing.
DOWN buttons to set the pres-
UP or
14
UP
button
DOWN
button
PROGRAM
button
FIG. 12
FIG. 13
FIG. 14