Programming The Central Water Filtration System - Whirlpool WHELJ1 Installation And Operation Manual

Programming the Central Water Filtration System

Display
CLEAN
button
When the power supply is plugged into the electrical
outlet, a model code and a test number (example:
J2.0), begin to flash in the faceplate display. Then,
12:00 PM and the words "PRESENT TIME" begin to
flash.
NOTE: If "- - - -" shows in the display, press the
s
UP or DOWN button until the model code
"CF 8" shows in the display. Then, press the
PROGRAM button to set, and change to the
flashing "PRESENT TIME" display.
Questions? Call Toll Free 1-866-986-3223
When you call, please be prepared to provide the model and serial number,
or visit www.whirlpoolwatersofteners.com
located on the rating decal on back of the cover.
SET TIME OF DAY
If the words "PRESENT TIME" do not show in the dis-
play, press the PROGRAM button until they do.
1. Press the UP or
present time. Up moves the display ahead; down
sets the time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down
for fast advance.
2. Press the PROGRAM button a few times, until the
time appears on the display, but is not flashing.
Monday- Friday, 8 AM - 7 PM EST
12
UP
button
DOWN
button
PROGRAM
button FIG. 12
s
DOWN buttons to set the
FIG. 13