Whirlpool System I Instructions Manual page 11

Call l-800-253-1301 to order.
Replacement Parts & Accessories
System I Replacement Cartridge Kit
Kit includes Sediment/Carbon (SC) Cartridge 4373529
System II Replacement Cartridges Kii
Kit includes
Lead Reduction
(L) and Carbon
Filter (CF) Cartridges. Cartridges can also be
ordered individually.
4373573
System Ill Replacement Cartridge Kit
Kit includes Lead Reduction (L) and two
Carbon Filter (CF) Cartridges. Cartridges can
also be ordered itkhidual/y. - 14373574
SedimenVCarbon (SC) Cartridge 14373529
Lead Reduction (L) Cartridge
Carbon Filter (CF) Cartridge
d
14373530
14373531
Saddle
Valve
Additional Parts 1
14373572 1
I/." Tubino I431 9151 1
Needed for Multiple
Connections:
T Connector with Push-in Ends 4319152
Additional tubing for basement installation
4319151
If You Need Assistance...
The Whirlpool Consumer Assistance Center will answer
any questions about operating or maintaining your
water filtration system not covered in the Installation
Instructions and Use and Care Guide. The Whirlpool
Consumer Assistance Center is open 24 hours a day,
7 days a week. Just dial
1-800-253-1301 -
the call is
free. When you call, you will need the water filtration
system model number and serial number. Both num-
bers can be found labeled on the filtration assembly.
How To Arrange For Service...
In the event that your Whirlpool appliance should ever
need service, call the dealer from whom you purchased
the appliance or a Whirlpool-authorized service
company. A Whirlpool-authorized service company is
listed in the Yellow Pages of your telephone directory
under "Appliances-Major-Service or Repair." You can
also obtain the service company's name and telephone
number by dialing, free within the continental United
States, the Whirlpool Consumer Assistance Center
telephone number, l-800-253-1 301. A special operator
will tell you the name and number of your nearest
Whirlpool-authorized service company.
Maintain the quality built into your Whirlpool appliance -
call a Whirlpool-authorized service company.
WATER FILTRATION SYSTEM I
MODEL NO. WSClOOYW
REPLACEMENT CARTRIDGE: WHIRLPOOL SC FSP# 4373529
RATED SERVICE FLOW - 0.6 gpm (2.28 Ipm)
MAX. OPERATING PRESSURE -100 psig (862 kPa)
MAX. OPERATING TEMPERATURE 100°F (36°C)
NOTICE: ACTIVATED CARBON FILTERS ARE NOT INTENDED FOR USE WITH WATER THAT IS MlCROBlOLOGlCALLY
UNSAFE OR WITH WATER OF UNKNOWN QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE UNIT.
PLEASE READ THE PERFORMANCE DATA SHEET.
THIS PRODUCT HAS BEEN TESTED AND LISTED UNDER NSF STANDARD 42 FOR CHLORINE, TASTE AND ODOR
REDUCTION (CLASS I) AND PARTICULATE REDUCTION (CLASS II).
WHIRLPOOL, BENTON HARBOR, MI, USA.
IT IS ESSENTIAL THAT OPERATIONAL, MAINTENANCE AND FILTER REPLACEMENT REQUIREMENTS
NSF@
BE CARRIED OUT FOR THE PRODUCT TO PERFORM AS ADVERTISED.
0
WATER FILTRATION SYSTEM II
MODEL NO. WSC2OOYW
REPLACEMENT CARTRIDGE: WHIRLPOOL L FSPU 4373630 WHIRLPOOL CF FSP# 4373631
RATED SERVICE FLOW - 0.6 gpm (2.20 Ipm)
MAX. OPERATING PRESSURE -100 psig (862 kPa)
MAX. OPERATING TEMPERATURE 100°F (38%)
NOTICE: ACTIVATED CARBON FILTERS ARE NOT INTENDED FOR USE WITH WATER THAT IS MICROBIOLOGICALLY
UNSAFE OR WITH WATER OF UNKNOWN QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE UNIT.
PLEASE READ THE PERFORMANCE DATA SHEET.
THIS PRODUCT HAS BEEN TESTED AND LISTED UNDER NSF STANDARD 42 FOR CHLORINE, TASTE AND ODOR
REDUCTION (CLASS I) AND PARTICULATE REDUCTION (CLASS II) AND UNDER NSF STANDARD 53 FOR LEAD,
CYST AND TURBIDITY REDUCTION.
WHIRLPOOL, BENTON HARBOR, MI, USA.
IT IS ESSENTIAL THAT OPERATIONAL, MAINTENANCE AND FILTER REPLACEMENT REQUIREMENTS
0
NSF@
BE CARRIED OUT FOR THE PRODUCT TO PERFORM AS ADVERTISED.
WATER FILTRATION SYSTEM Ill
mifl
2
ol MODEL NO. WSCBOOYW
REPLACEMENT CARTRIDGE: WHIRLPOOL L FSP# 4373630 WHIRLPOOL CF FSP# 4373631
-IIoN RATED SERVICE FLOW - 0.6 gpm (2.28 Ipm)
MAX. OPERATING PRESSURE -100 psig (862 kPa)
MAX. OPERATING TEMPERATURE 100°F (38°C)
NOTICE: ACTIVATED CARBON FILTERS ARE NOT INTENDED FOR USE WITH WATER THAT IS MICROBIOLOGICALLY
UNSAFE OR WITH WATER OF UNKNOWN QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE UNIT.
PLEASE READ THE PERFORMANCE DATA SHEET.
THIS PRODUCT HAS BEEN TESTED AND LISTED UNDER NSF STANDARD 42 FOR CHLORINE, TASTE AND ODOR
REDUCTION (CLASS I) AND PARTICULATE REDUCTION (CLASS II) AND UNDER NSF STANDARD 63 FOR LEAD,
CYST AND TURBIDITY REDUCTION. SEE PERFORMANCE DATA SHEET FOR PERMISSIBLE VOC CLAIMS.
WHIRLPOOL, BENTON HARBOR, MI, USA.
.o
IT IS ESSENTIAL THAT OPERATIONAL, MAINTENANCE AND FILTER REPLACEMENT REQUIREMENTS
NSF@
BE CARRIED WT FOR THE PRODUCT TO PERFORM AS ADVERTISED.
11