Reset Your Router To Factory Defaults - TRENDnet TEW-830MDR User Manual

TRENDnet User's Guide
1. Log into your router management page (see
on page 23).
2. Click on Tools and on click Firmware Upgrade.
3. Depending on your web browser, in the Upload Firmware section, click Browse or
Choose File.
4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
5. Click Upload. If prompted, click Yes or OK.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your router management page"

Reset your router to factory defaults

Advanced > Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
"Backup and restore your router configuration
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the side panel of your router, see
Features" on page 2. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page / TRENDnet Mesh App
1. Log into your router management page (see
on page 23).
2. Click on Tools and on click Backup / Restore.
3. Next to Reset to Defaults, click Perform reset. When prompted to confirm this action,
click OK.
Note: This will reset all mesh network nodes to factory defaults.
TEW-830MDR / TEW-830MDR2K
settings" on page 59.
"Product Hardware
"Access your router management page"
51