Table of Contents
Advertisement
TRENDnet User's Guide
Devices / Node Advanced Settings
© Copyright 2020 TRENDnet. All Rights Reserved.
WPS (WiFi Protected Setup)
WPS is a feature that allows you to easily connect wireless client devices to your
wireless router or mesh network. If you wireless client devices support WPS, you can tap
the WPS button on the app to activate the WPS pairing process on your TEW-830MDR,
then push the WPS button on your wireless client device to connect. The pairing process
may take up to 2 minutes to complete.
Samba
Samba is a network protocol that allows you to access shared files through your
network. In order to share files, you will need to plug in a USB storage device on the USB
port of the TEW-830MDR.
1. Plug in USB storage device into the USB port. Select the correct device in the app that
you plugged the USB storage device and enable Samba.
2. Under Windows®, you can access the USB storage device on your computer under
Computer > Network > TRENDNETXXXXXX > sda1.
Note: Each TEW-830MDR unit will be listed under Computer > Network section with the
format TRENDNETXXXXXX (ex: TRENDNET459681, TRENDNET459682, etc.).
If your Windows® computer is not able to discover any network devices, you may not
have network discovery and file sharing enabled, therefore, you may need to set the
network to a private network and turn the feature on in Windows®
TEW-830MDR / TEW-830MDR2K
11
Advertisement
Table of Contents
