Peripheral Setup - Intel 440BX Manual

BIOS Setup

Peripheral Setup

Choose the item from the BIOS Setup main menu.
AMIBIOS SETUP - PERIPHERAL SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Auto
OnBoard Serial Port1 Auto
OnBoard Serial Port2 Auto
Serial Port2 Mode Normal
IR Duplex Mode Full
OnBoard Parallel Port Auto
Parallel Mode Normal
Parallel IRQ Auto
Parallel DMA Channel N/A
OnBoard IDE Both
OnBoard FDC This option enables the FDC (Floppy Drive
Controller) on the motherboard or auto detects
the FDC.
OnBoard Serial This option specifies the base I/O port address
Port1 of serial port 1.
OnBoard Serial This option specifies the base I/O port address
Port2 of serial port 2.
Serial Port2 This option specifies the serial port2 mode.
Mode Normal: The normal serial port mode is being
used.
IrDA/ASKIR: The serial port2 will be redirected
to support IR function when this
option is set to IrDA or ASKIR.
IR Duplex Mode This option is to specify the Duplex mode of
Serial Port 2.
OnBoard Parallel This option specifies the base I/O port address
Port Channel of the parallel port on the motherboard.
39
↑ ↓ → ←: Select Item
ESC : Quit
F1 : Help PU/PD/+/– : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults