Advertisement
5
Cable Diagram
The cable diagram shown below may differ from that recommended by the FATEK AUTOMATION Corporation.
Please be assured, however, that there is no operational problem in applying the cable diagram shown in this
manual.
•
The FG pin on the External Device must be D-class grounded. Refer to your External Device manual for
details.
•
The SG and FG are connected inside the Display. If you connect the External Device to the SG, do not form
any short-circuit loop in the system design.
•
If the communication is not stable because of noise or other factors, connect an isolation unit.
Cable Diagram 1
Display
(Connection Port)
GP (COM1)
ST (COM1)
*1
IPC
PC/AT
*1
Available only with a COM port that supports RS232C.
COM Port on IPC (page 6)
GP-Pro EX Device/PLC Connection Manual
FBs-232P0-9F-150 by FATEK
Display
FBs-232P0-9F-150
Cable
External Device
Mini DIN(plug)
37
FB Series SIO Driver
Remarks
-
Hide quick links:
Advertisement
