FATEK FB Series Manual page 2

Introduction
This manual describes how to connect the Display and the External Device.
In this manual, the connection procedure will be described by following the sections below:
1
System Configuration
This section shows the types of External
Devices that can be connected and SIO
type.
2
Selection of External Device
Select the model (series) of the External
Device to be connected and its connection
method.
3 Example of Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4
Setup Items
This section describes communication
setup items on the Display.
Set the communication settings of the
Display with GP-Pro EX or in off-line
mode.
5 Cable Diagram
This section shows cables and adapters
for connecting the Display and the
External Device.
Operation
GP-Pro EX Device/PLC Connection Manual
"1 System Configuration" (page 3)
"2 Selection of External Device" (page 8)
"3 Example of Communication Setting" (page
9)
"4 Setup Items" (page 32)
"5 Cable Diagram" (page 37)
2
FB Series SIO Driver