FATEK FB Series Manual page 11

Settings of External Device
Use the ladder software (WinProladder) for communication settings. After completing the settings, reboot the
External Device to enable them. Refer to your External Device manual for details.
1
Start up the ladder software (WinProladder).
2
Select [Setting] - [Port 2 Parameter] from the [PLC] menu.
3
In the [Comm. Parameter Setting] dialog box, set the following parameters.
Item
Baud Rate
Parity
Data Bit
Stop Bit
4
Click [OK] to complete the port settings.
GP-Pro EX Device/PLC Connection Manual
Settings
9,600
Even parity
7 bits
1 bit
11
FB Series SIO Driver