Zip IP-CAM530 Instruction Manual page 13

Universal Deep Bases
Wall & Ceiling Mounting
The universal deep bases
offer extra room for easy
termination and to disguise
cabling and connections
for a neat finish.
They are designed for
use with most of the Zip
range so you know it'll be
a prefect fit.
Code:
Code:
1
x4 x4
Screw through
the four holes in
the bottom of the
base and into the
mounting surface
using the screws
and wall plugs
provided.
2
x4
Thread the camera's
cable through the
lid and through the
deep base. Screw
lid to the deep
base using the Hex
screws and Allen
key supplied with
the base.
3
Fix the camera to
the deep base as
described on the
opposite page.
Get more from your Zip NVR with our Free CCTV tips at
IP-BASE001B
(Black)
IP-BASE001W (White)
Pole & Wall Bracket Mounting
A practical way to get the
ideal viewing angle. As well
as a wall bracket there are
200mm, 300mm and 500mm
ceiling brackets available.
Code: IP-BRKT001B (Wall)
Code: IP-BRKT001W
(Wall)
Code: IP-BRKT200B (200mm)
Code: IP-BRKT200W
(200mm)
Code: IP-BRKT300B (300mm)
Code: IP-BRKT300W (300mm)
Code: IP-BRKT500B (500mm)
Code: IP-BRKT500W (500mm)
First you'll need to fix the camera to the base as
shown in "Wall & Ceiling Mounting" steps 2 and 3.
1
Mark the fixing holes on
the mounting surface.
Drill and insert the four
anchor bolts provided.
With the bracket over
the anchor bolts, place
a washers, split ring
and then screw a nut
on to each exposed
thread to secure.
2
Screw the deep base
on to the end of the
ceiling/wall bracket.
Lock the base in-place
using the small slotted
grubs screws supplied.
When ceiling mounting
the mounting plates
is attached to the
opposite end of the
pole in the same way.
ZipNVR.com
13