Table of Contents
Advertisement
Logical Address Configuration Editor
© National Instruments Corporation
The Logical Address Configuration Editor has options for the device's
logical address, device type, address space, VXI shared memory, and the
resource manager delay. The following paragraphs describe the options
you can select for each field.
Logical Address
This parameter sets the logical address of the VXIpc controller. The
following table shows the allowable range of values and the default value.
Logical Address Range
0 to 254
Device Type
This field indicates the classification of the VXIpc controller. The default
value is MBD, designating a message-based device. The following table
shows the available options.
Classification
Extended Device
Message-Based Device
Register-Based Device
The device type affects only the contents of the Device Class field in the
Device Type register. The functionality of the other registers does not
change.
Address Space
This field indicates the addressing mode(s) of the device's operational
registers. You can configure the VXIpc controller in one of three ways.
The default addressing mode is for A16 space only. Your other options
are A16/A24 and A16/A32.
Chapter 3
3-3
VXI Configuration Utility
Default Value
0
Setting
EXT
MBD
RBD
VXIpc Controller for VxWorks
Advertisement
Table of Contents
