Sony Ericsson T610 Working Instructions page 3

# Figure
4
5
6
7
3/000 21-1/FEA 209 544/76 C

SonyEricsson Mobile Communications AB
Instruction
Remove the antenna cover. Use
the Antenna Cover Opening
tool. Push the tool inside the
battery cavity in the arrow
direction until it contacts the
battery cavity wall. The cover
should only be pushed until the
snap lock is released. Then
remove the antenna cover with
your fingers.
( fig 1.4)
fig 1.4
Remove the on/off key with
your fingers.
(Fig. 1.5)
fig1.5
Remove the antenna assembly
by using the front opening tool
NTZ 112 302. Release it and
then gently remove it with your
fingers.
(fig1.6)
fig1.6
Remove the 4 screws.
(fig1.7)
fig1.7
Working Instructions, SP/Mechanical
Note
Be careful not to damage
the close clips on the
antenna cover with the
antenna cover opening
tool. If you damage it you
must replace the antenna
cover.
Gently push the antenna
assembly in the arrow
direction.
Removed screws can not
be reused and must be
scrapped.
3(33)