Advertisement
Adjusting the arm position
When the height is not sufficient, change the arm
attachment positions on the belly plate. The height
can be adjusted in four levels.
1
Adjust the height of arm position.
2
Use the supplied hexagonal wrench to tighten the
two bolts. Fix the arm holders to the belly plate.
Shoulder rests
For more comfortable playing posture, the shoulder rests can be adjusted.
Adjusting the width
Belt
The belt helps to stabilize instrument while play-
ing. Pull on both ends to fasten the belt.
Do not engage in any operation other than
playing instrument while wearing the car-
rier. This can cause loss of balance and
result in injury.
Adjusting the angles
When set to the most forward:
Tuning key
Adjusting the Carrier
Belly plate
Arm
Arm holder
When set to the most rearward:
Belt
Marching Drum Carrier Owner's Manual
Bolts
Hexagonal
wrench
Touch fastener
7
Advertisement
