Advertisement
Setting the Marching Bell & Xylophone
Marching bell/
Marching xylophone
2. Mounting the instrument on the carrier
1
Insert the arms of the carrier into the arm brackets
of the carrier frame installed to the instrument.
2
Tighten the arm fixing screws by hand.
3. Adjusting the angle of the instrument
To adjust the angle, first put the carrier and instru-
ment (properly mounted) down on a floor, for
secure operation.
1
Turn the angle adjustment bolts on the right and left
sides by hand to adjust the arms to the most com-
fortable playing angles. Make sure that the angles
are even.
2
Use the supplied wrench (8mm) to tighten the lock
nuts and fix the angle of the instrument.
14
Marching Drum Carrier Owner's Manual
Carrier frame
Arms
Arm fixing
screw
Arm
Tilt the instrument up toward yourself.
Carrier
Arm bracket
Angle adjustment bolt
Lock nut
Advertisement
