Advertisement
Previous settings for snare drum with slide-attachment
Before installing the attachment to the snare drum, you must remove the lug holders from the
attachment and assemble the tongue plate MAST600 (sold separately).
1
Remove both lug holders (see illustration) from
the attachment.
2
Fix the tongue plate (sold separately) with the
longer side up, on the center holes of attach-
ment.
3
Insert the tongue plate assembled with the
attachment into the slide of the snare drum.
4
Tighten the snare hold bolts by hand to secure
the attachment and prevent it from moving.
5
Use the supplied wrench (10mm) to tighten
both lock nuts and fix the attachment to the
snare drum.
Setting the Snare Drum
Attachment
Longer side up
Tongue plate
MAST600 (sold separately)
Slide
Marching Drum Carrier Owner's Manual
Lug holders
Tongue plate
Lock nut
Snare hold
bolt
9
Advertisement
