Optimus KIT Installation Manual

! TELGUARD POWER SUPPLY UNITS MUST BE USED AND SHOULD NOT POWER ANY OTHER EQUIPMENT.
A SITE SIGNAL NETWORK TEST IS TO BE UNDERTAKEN BEFORE INSTALLATION
OPTIMUS KIT
CONFIGURATIONS
AND
MAIN OPTIMUS KIT HUB PCB
HUB and SATELLITE
CONNECTIONS:
–
–
–
–
www.optimus-uk.com T | +44(0)1306 710120
CONNECTIONS
OPTIMUS KIT I/O BOARD
Used ONLY in Optimus KIT Satellite Panel
External Speaker from
Satellite Panel(s)
12V Supply to Satellite
External Mic from
Satellite Panel(s)
External CAN Bus
to/from Satellite Panel(s)
Wire Hi to Hi / Lo to Lo /
0V to 0V
WHEN CHANGING RELAY MODULES
E | info@optimus-uk.com
Expansion CAN Bus
Socket for Displays,
GREEN Flashing
= Normal Operation
Onboard Solid State Relay
60V AC/DC
200 mA
STATUS LED RED Closed
z z Ensure Correct Alignment
Power Off
INSTALLATION GUIDE
OPTIMUS KIT ECO SAT PCB
Used ONLY in Optimus KIT Satellite Panel
Keypads etc.
OK LED
SEE REVERSE FOR INSTALLATION TIPS