Related Manuals for Optimus Range
Summary of Contents for Optimus Range
- Page 1 4G LTE RANGE OF INTERCOM UNITS INSTALLATION MANUAL Raising Standards Safety Assured...
-
Page 2: Table Of Contents
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs CONTENTS InstallatIon Manual for optIMus 4G ltE ranGE of IntErcoM unIts applicable Products GEnEral Overview How it works Product Description and Dimensions 04 – 05 InstallatIon and connEctIon special Tools and Materials needed What’s Inside The Box... -
Page 3: Applicable Products
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs APPLICABLE PRODUCTS applIcablE products The Commtel 4G PrO GsM Board is used in the following products: Optimus 4G LtE RanGE Of intERcOm units. This Installation manual applies to these products. -
Page 4: General
OVERVIEW ovErvIEw The Optimus 4G lTe range of Intercom units is an entry system suitable for any door, gate or barrier requiring communication and control over access. It can be used in any environment, internally or externally, including Domestic, Commercial and Public sectors. - Page 5 InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs OVERVIEW product dEscrIptIon and dIMEnsIons EK2* EK3* nuMBer Of Call BuTTOns BaCKlIT KeyPaD – InsTaller PrOGraMMaBle limited limited limited limited PrOGraMMeD By sMs limited limited limited limited PrOGraMMeD By aPP...
-
Page 6: Installation And Connection
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs INSTALLATION AND CONNECTION spEcIal tools and MatErIals nEEdEd 4G analyser. recommendation: Make ~ Csl Model ~ Cs2389 4G/lTe rs stock no. 176-2538 security screwdriver Bit: 2.5mm Hex with a 1mm Pin hole. -
Page 7: Positioning And Mounting The Intercom Unit
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs INSTALLATION AND CONNECTION posItIonInG and MountInG tHE IntErcoM unIt The position of the Intercom unit should maximise the safest and best operational performance and convenience, including: users considerations, with optimal height recommendations (to centreline of the Intercom unit): Wheelchair: 750 –... -
Page 8: Siting Of The Antenna
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs INSTALLATION AND CONNECTION sItInG of tHE antEnna The supplied 4G antenna is an external item that should be installed in the most suitable position so that as high as possible and obtaining the maximum signal strength, checked by a 4G analyser (please see detailed instructions provided with the Analyser). -
Page 9: Protective Earth And Bonding Terminals
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs INSTALLATION AND CONNECTION protEctIvE EartH and bondInG tErMInals The Intercom unit must be permanently earthed. The unit is fitted with an earth stud marked up with an earth label, the stud size is M3 and has a M3 nyloc nut attached. -
Page 10: Applications And Connections
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs APPLICATIONS AND CONNECTIONS 4G ltE I/o board connEctIons 4G ltE pcb connEctIons... -
Page 11: Applications Examples
Optimus to Gate or Barrier system, where Controller requires both Command and a simultaneous Hold Open switch Example 4.0: Optimus to an electric lock or latch release were the lock Power supply unit requires a Pulse to release or unlock Example 5.0:... - Page 12 InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs APPLICATIONS AND CONNECTION ExaMplE 2.0 Optimus tO GatE OR BaRRiER sYstEm Application: thE cOntROLLER REquiREs a cOnstant cOmmanD fOR thE DuRatiOn Of hOLD OR staY OpEn Condition: RELaY cOmmanD actiOn...
- Page 13 InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs APPLICATIONS AND CONNECTIONS ExaMplE 4.0 Application: Optimus tO an ELEctRic LOcK OR Latch RELEasE Condition: thE LOcK pOwER suppLY unit REquiREs a puLsE tO RELEasE OR unLOcK RELaY actiOn REsuLt...
-
Page 14: Installing Or Replacing The Sim Card
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs APPLICATIONS AND CONNECTIONS ExaMplE 6.0 Application: aLtERnativE Exit cOntROL usinG auxiLiaRY input auxiLiaRY input tO activatE sEt RELaY. ExampLE: push tO Exit Condition: RELaY actiOn REsuLt Pulse Close >70ms nO... -
Page 15: Programmable Settings Via Gsm One App + Additional Manual Sms Commands
Manage sMs alerts. please note: auxiliary 1 and auxiliary 2 Inputs are factory set as Inputs only and cannot be changed to Outputs. The settings and features are programmed using Commtel GsM One app downloadable from www.optimus-uk.com and additional Manual sMs Commands. - Page 16 InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs PROGRAMMABLE SETTINGS VIA GSM ONE APP + ADDITIONAL MANUAL SMS COMMANDS addItIonal Manual sMs COMMANDS Where you see serIalnuM in the command alert, replace with the serIalnuM of the panel to be programmed.
-
Page 17: Internal Cell Replacement For Real Time Clock (Rtc)
Please dispose of or recycle the exhausted cell in a responsible way and according to the Cell manufacturer’s instructions. If storing un-powered 4G PrO boards for an extended time, Optimus recommends that the cell is removed until the board is needed. -
Page 18: Eu Ce Declaration Of Conformity And Radio Equipment Directive
InsTallaTIOn Manual fOr OPTIMus 4G lTe ranGe Of InTerCOM unITs EU CE DECLARATION OF CONFORMITY AND RADIO EQUIPMENT DIRECTIVE This can be found at www.commtel-uk.com... - Page 19 HousE, nortHwood park GatwIck rd, crawlEy, wEst sussEx rH10 9xn tElEpHonE: 01306 710120 EMaIl: info@optimus-uk.com www.optimus-uk.com EU CE Declaration of Conformity and Radio Equipment Directive is available at www.commtel-uk.com | GB-RH10 9XN...
Need help?
Do you have a question about the Range and is the answer not in the manual?
Questions and answers