Status Display - Kenmore 796.3146 Series Use & Care Manual

TIME AND STATUS DISPLAY
The time and status dlsplay shows the estimated time remaining and cycle progress.
CYCLE STATUS INDICATOR
These LEDs wffl iffumlnate when a cycle is selected
to indicate which stages wiff run. When a cycle is
running, the LED will blink for the active stage. Once
a stage is complete, the LED wiH turn off. If a cycle
is paused, the a_ive LED wffl stop bllnklng_
O
ESTIMATED TIME REMAINING
When a cycle is selected, the default time for
that cycle is displayed. This time will change as
modifiers or options ore sele_ed, Once the START/
PAUSE button is pressed, the washer will measure
the size of the load. The estimated time may
change once the load size has been measured.
NOTE: The time shown is only an estimate. This time
is based on normal operating conditions. Several
external factors (load size, room temperature,
incoming water temperature, etc.} can affect the
actual time.
19