Time And Status Display - Kenmore 796.3142 Series Use & Care Manual

TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining and cycle progress.
CYCLE STATUS INDICATOR
These LEDswill illuminate when a cycle is selected
to indicate which stages wilJ run. When a cycle is
running, the LED will blink for the active stage. Once
a stage is complete, the LED will turn off. If a cycle
is paused, the active LEDwill stop blinking.
O
ESTIMATED TIME REMAINING
When a cycle is selected, the default time for
that cycle is displayed. This time will change as
modifiers or options are selected. Once the START/
PAUSE button is pressed, the washer will measure
the size of the load. The estimated time may
change once the load size has been measured.
NOTE: The time shown is only an estimate. This time
is based on normal operating conditions. Several
external factors (load size, room temperature,
incoming water temperature, etc.) can affect the
actual time.
19¸