Download Print this page

Siemens SIMATIC NET ANT793-8DQ Compact Operating Instructions page 4

Right circular polarized antenna 5.8 ghz

Advertisement

Available languages

Available languages

1. Unscrew the protective caps from the two mounting screws ③ on the
Procedure
back of the antenna base plate ④.
2. Fasten the mounting bracket ① to the back of the antenna base
plate ④ with two nuts and spring washers ②. Align the mounting
bracket ① as shown in the picture. The tightening torque is 3.0 Nm.
3. Place the U-bolt ⑤ around the mast ⑦.
4. Hold the tensioning clamp ⑥ with bent edges pointing to the mast ⑦
and place the tensioning clamp ⑥ over the two ends of the
U-bolt ⑤ through the slotted holes.
5. Attach the mounting bracket ⑧ with the pre-mounted antenna to the
two ends of the U-bolt ⑨.
6. Place a spring washer and a nut on each end of the U-bolt ⑨.
7. Fasten the U-bolt to the mast with the screw nuts. Do not tighten the
nuts yet.
8. Move the antenna to the desired position on the mast. Tighten the
nuts slightly.
9. Attach the flexible connection cable to the SCALANCE W device (not
included) to the N connector socket of the antenna. The maximum
tightening torque for the union nuts is 1.5 Nm.
10. Align the antenna to the desired position by moving it along the oval
hole on the mounting bracket. Tighten the nuts. The tightening torque
is 7.0 Nm.
11. Protect the connectors from environmental influences (e.g. with self-
vulcanizing adhesive tape or a shrink-on hose).
4 Technical data
Electrical data
Frequency range
Antenna gain
Impedance
VSWR
Front-to-back ratio
Polarization
Radiation angle
Connector
Maximum input power
Mechanical data
Antenna
Length
Length, mounted on mast
Base plate
Mounting bracket (W x H x L)
Weight
Installation on the mast
Storage and operating temperature
Degree of protection
RoHS 2002/95/EC
Silicone-free
Material of the outer shell
5.7 to 5.85 GHz
15 dBic
50 Ω
1.5: 1
33 dB
circular (RHCP)
28°
1x N-connector female
50 W
301 mm
395 mm
Ø 140 mm
44 mm x 19 mm x 115 mm
0.64 kg
-40 ℃ to +60 °C
Ø 41 mm
IP66
compliant
yes
Polycarbonate
5 Dimensional drawing
(dimensions in millimeters)
Antenna
Side and rear view
Mounting bracket
Top and side view
6 Field diagrams
5.7 GHz
5.8 GHz

Advertisement

loading