Table of Contents
Advertisement
4.4
Pump hose
4.4.1
General
A:
Outer extruded layer made of natural rubber
B:
Two nylon reinforcement layers
C:
Inner extruded liner
The pump hose liner material should be chemically
resistant with the product to be pumped. Dependent on
the specific requirements of your application a
corresponding pump hose must be selected. For each
pump model various hose types are available.
The material of the inner liner of the pump hose
determines the hose type. Each hose type is marked by
a unique colour code.
Hose type
NR
NBR
EPDM
CSM
Consult your Bredel representative for
more detailed information about the chemi-
cal and temperature resistance of pump
hoses.
The Bredel pump hoses have been carefully machined,
therefore there are minimum tolerances in wall
thickness. It is very important to guarantee the correct
compression of the pump hose, because:
•
When the compression is too high, it creates a
too high load of the pump and pump hose,
which may result in a reduction of the life of the
pump hose and bearings.
Material
Natural rubber
Purple
Nitrile rubber
Yellow
EPDM
Red
CSM
Blue
Colour code
DESCRIPTION
19
Advertisement
Table of Contents
