Warranty Conditions - Bredel Hose pump Series Manual

WARRANTY CONDITIONS

3 WARRANTY CONDITIONS
The manufacturer offers a two-year warranty on all
parts of the hose pump. This means that all parts will be
repaired or replaced free of charge, with the exception
of consumables, such as pump hoses, hose clamps,
ball bearings, wear rings, and seals, or parts which
have been misused or have been intentionally
damaged.
If parts are used that are not Watson-Marlow Bredel
B.V. (hereafter called Bredel) parts, every warranty
becomes void.
Damaged parts which are covered by the applicable
warranty conditions can be returned to the
manufacturer. The parts must be accompanied by a
fully filled in and signed safety form, as present in the
back of this manual. The safety form must be applied to
the outside of the shipping carton. Parts which have
been contaminated or which have been corroded by
chemicals or other substances which can pose a health
risk, must be cleaned before they are returned to the
manufacturer. Furthermore, it should be indicated on
the safety form which specific cleaning procedure has
been followed, and it should be indicated that the
equipment has been decontaminated. The safety form
is required at all items, even if the parts have not been
used.
Warranties purporting to be on behalf of Bredel, made
by any person, including representatives of Bredel, its
subsidiaries, or its distributors, which do not accord with
the terms of this warranty shall not be binding upon
Bredel unless expressly approved in writing by a
Director or Manager of Bredel.
13