Table of Contents
Advertisement
7.8
Fitting options
7.8.1
Fitting a high-level float switch
1.
Dismount the standard breather (A) on the
cover of the pump head.
2.
Mount the breather (A) with high-level float
switch.
3.
Connect the high-level float switch to the
auxiliary power circuit via the 2-metre long PVC
cable (2 x 0.34 mm
electrical contact of the float switch is normally
closed (NC). The knob is upwards for normally
closed operation. When the lubricant level is
(too) high the contact will open.
*
Specifications
Voltage:
Max. 230 V AC/DC
Current:
Max. 2 A
Power:
Max. 40 VA
*
For use in non-explosive atmospheres
2
). Bear in mind that the
MAINTENANCE
39
Advertisement
Table of Contents
