NEC UN462A Firmware Update Procedure page 2

Read This Manual before Attempting Firmware Update
This manual describes the procedure for updating firmware of monitor by using the HTTP server function.
For details on the HTTP server function, the names of the components of the monitor, the Display Menu
screen operations, and so on, refer to the instruction manual.

Precautions

Target models:
UN462A/UN462VA/UN492S/UN492VS/UN552A/UN552S/UN552VS/UN552/UN552V/UX552S/
UX552

Series name is A50UN. This name is displayed in "SERIES".

Do not turn off the main power to the monitor or remove the LAN cable during firmware update.

For details on making a connection to the monitor from a computer through a network, using the
HTTP server function of the monitor, read "LAN Control" in the instruction manual.

As your Web browser, you must use "Microsoft Internet Explorer 10.0" or later.
Since the monitor uses "JavaScript" and "Cookies", change your browser settings to enable the use
of these functions. The way in which these settings are made depends on the version of the browser.
So, refer to the browser Help and so on.

Updating the firmware does not affect any data set in the screen menu of monitor.

To apply a firmware version update over the network, DISPLAY and MEDIA PLAYER of
NETWORK FUNCTIONS must be enabled.

Symbols
This manual uses the following symbols.
Note
Describes information that must be noted.
Tip
Provides supplementary explanations and useful information.
2