Technical Data - Graco ChemSafe 205 Instructions - Parts Manual

Technical Data

Data
Technical Technical Data
ChemSafe 205 205 Diaphragm Diaphragm Pump
ChemSafe ChemSafe 205 Diaphragm
Maximum fluid working pressure
Minimum air startup pressure
Fluid inlet and outlet size
Maximum suction lift (reduced if balls don't
seat well due to damaged balls or seats,
lightweight balls, or extreme speed of cycling)
Maximum size pumpable solids
Minimum recommended ambient air
temperature for operation and storage.
NOTE: ChemSafe pumps may be operated
NOTE: NOTE:
in low temperature environments. Take care
to avoid freezing or crystallization of the
fluid inside or outside of the pump. Running
the pump at temperatures below freezing
may accelerate the wear of the elastomer
components in the pump.
Air consumption at maximum flow
Fluid flow per cycle
Maximum free-flow delivery
Maximum pump speed
Weight; PTFE [UHMW]
Wetted Parts
Maximum fluid temperature
PTFE Pumps
UHMWPE Pumps
Noise (dBa)
Sound power was measured per ISO-9614–2: 1997. Sound pressure was tested 3.28 ft (1 m) from the
equipment.
Sound Power
At 100 cycles per minute
At 375 cycles per minute
Sound Pressure
At 100 cycles per minute
At 375 cycles per minute
California California California Proposition Proposition 65 Proposition
CALIFORNIA RESIDENTS CALIFORNIA CALIFORNIA RESIDENTS RESIDENTS
WARNING: WARNING: WARNING: Cancer and reproductive harm — www.P65warnings.ca.gov.
334792G
Pump
Pump
65 65
US US US
100 psi
30 psi
1/4 npt
Wet: 31.2 ft.
Dry: 6.5 ft.
0.06 in.
32° F
4.8 scfm
0.008 gallons
2.5 gpm
375 cycles per minute
4.1 lb [3.0 lb]
PTFE, EPDM, NBR, UHMWPE
212° F
158° F
61 dBa
64 dBa
70 dBa
74 dBa
Technical Data
Metric Metric Metric
0.69 MPa, 6.9 bar
0.21 MPa, 2.1 bar
1/4 bspt
Wet: 9.5 m
Dry: 2 m
1.5 mm
0° C
0.14 scmm
0.03 liters
9.5 lpm
1.9 kg [1.4 kg]
100° C
70° C
29