nOTE: Some city regulations connect only to a properly General do not allow installing a ground ed receptacle. Information pump with plastic pipe. Check Septic tank is to be vented local regulations. in ac cor dance with local plumbing codes. Thank you for purchasing your do not smoke or use sparkable 5.
unplug cord before continuing be checked with the ohmmeter Pump reassembly pump to see if it can be reused. Servicing is functional. 4. ground che ck. Set ohmmeter 3. Checking motor stator. scale pointer to r X 100K read the following instructions if motor does not run when scale and check meter by carefully...
Page 5
6. replacing seal. if water is 8. reassembly of stator and probability has a wire touching the stator shell at some point found in motor, seal must housing. replace stator (20) and the stator will have to be replaced. remove bottom with terminal block turned be replaced.
Page 6
11. Manual pumps. all general Pump instructions automatic Servicing pumps apply to manual pumps except the level switch is not used and the power cord does Pump is now ready for check not have a vent tube. run before air testing and manual models have the plug filling with oil.
SP50 Parts List SP50A x SP50M x Single Phase SP50M x Three Phase Ref. No. Part No. Description Qty. Ref. No. Part No. Description Qty. 11584-043-4 Nameplate 11584-043-4 Nameplate 14981-001-1 Plug - Pipe 1/4” 14981-001-1 Plug - Pipe 1/4” 56-036-2 Motor Housing (Includes Handle) 56-023-2 Motor Housing (Includes Handle)
Page 8
SP50AB1 Parts List SP50AB1 Ref. No. Part No. Description Qty. 11584-043-4 Nameplate 14981-001-1 Plug - Pipe 1/4” 56-013-2 Motor Housing (Includes Handle) 13349-000-1 Motor- 115 V. single phase 77-003-1 O - Ring Sq. cut 239-005-1 Bolt 208-010-2 Flange - Discharge 324-001-1 Gasket - Discharge Flange 202-010-2...
Limited Warranty HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2”), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture. Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance.
Need help?
Do you have a question about the Hydromatic SP50 and is the answer not in the manual?
Questions and answers