Advertisement
Fig.7
5.8 DISPLAY SCREEN:
1. . . . . . . . . . . . . . COOLING MODE INDICATOR
2 . . . . . . . DEHUMIDIFYING MODE INDICATOR
3 . . . . . . . . . . . . . . . . TIMER MODE INDICATOR
4 . . . . . . . . . . . . . COOLING MODE INDICATOR
5 . . . . . . . . . . . . . . . . TEMPERATURE DISPLAY
6. OPERATION
6.1
STANDBY MODE. When the machine is plugged in, the two centre segments of the display will light up to
indicate standby mode. When the machine is first switched on it will start up in cooling mode, set at 22ºC, with a
low fan speed. The machine mode can now be changed using the mode key. When the ON/OFF switch is
pressed again the machine returns to standby mode. If the machine remains in standby mode and is switched
on again it will start up in the last mode selected. If the machine is disconnected from the mains it will start up in
the default cooling mode when next used.
6.2
COOLING MODE. Press the MODE key to cycle through the options until cooling mode is reached indicated by
the snowflake symbol. (fig.7-1).
6.2.1 Press UP or DOWN to adjust the temperature.
6.2.2 Press FAN to select a higher or lower fan speed.
6.3
HEATING MODE. Press the MODE key to cycle through the options until heating mode is reached indicated by
the sun symbol. (fig.7-9).
6.3.1 Press UP or DOWN to adjust the temperature.
6.3.2 Press FAN to select a higher or lower fan speed.
6.4
FAN ONLY MODE. Press the MODE key to cycle through the options until fan mode is reached indicated by the
fan symbol. (fig.7-8).
6.4.3 Press the FAN key to switch between a low or high fan speed.
6.5
TIMER MODE. In standby mode press TIMER to set the switch ON time (the timer symbol lights).
6.5.1 Repeatedly press the timer key to advance the time in one hour increments from 1 to 24 hours. Stop when you
reach the required switch on time.
6.5.2 To set the power OFF time the machine must be running. The time set will remain valid for all modes.
6.5.3 Press TIMER to set the power OFF time (the timer symbol lights).
6.5.4 Repeatedly press the timer key to advance the time in one hour increments from 1 to 24 hours. Stop when you
reach the required switch off time.
6.5.5 When the machine is returned to standby mode the timer settings are cancelled.
6.6
DEHUMIDIFYING MODE. Press the MODE key to cycle through the options until dehumidifying mode is
reached indicated by the water droplets symbol. (fig.7-2).
6.6.1 The timer and sleep functions cannot be set in dehumidifying mode.
6.6.2 The fan speed is automatically selected at low and cannot be changed.
6.7
SLEEP FUNCTION. Press the SLEEP key to start the SLEEP function indicated by the moon symbol. (fig.7-6).
The default fan speed is low. The sleep function is only valid in COOLING mode and HEATING mode. In stand
by and water full conditions, sleep mode is automatically cancelled.
6.7.1 In COOLING mode, the sleep function turns the temperature up by 1°C, one hour after the sleep function is
turned on. The temperature then remains constant.
6.7.2 In HEATING mode, the sleep function turns the temperature down by 1°C, one hour after the sleep function is
turned on. The temperature then remains constant.
6 . . . . . . . . . . . . . . . . SLEEP MODE INDICATOR
7 . . . . . . . . . . . . . . . . WATER FULL INDICATOR
8 . . . . . . . . . . . . . . . . . . FAN MODE INDICATOR
9 . . . . . . . . . . . . . .HEATING MODE INDICATOR
10 . . . . . . . . . . . . . . . . . . . . . . LOW FAN SPEED
10 + 11 . . . . . . . . . . . . . . . . . .HIGH FAN SPEED
Original Language Version
SAC9000.V2 Issue No.1 19/01/10
Advertisement
