Advertisement
9. TROUBLESHOOTING
PROBLEM
Machine not working
Machine auto restarts frequently
Machine too noisy
Compressor not working
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
CAUSE
Power OFF
P2 flashes on screen or water full
indicator turns on
Timer set
Machine in direct sunlight
Doors and windows are open, many heat
sources in room
Filters too dirty
Air inlets or air outlet is blocked
Machine is not situated on level ground
Compressor heat protection cut out
operated
Environmental Protection
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be disposed of in
an environmentally protective way. Contact your local solid waste
authority for recycling information.
Remove the AAA batteries from the remote control handset by sliding
open the compartment door and unclipping them.
Dispose of batteries according to local authority guidelines.
WARNING: Do not dispose of by fire. This could result in an explosion.
Under the Waste Batteries and Accumulators Regulations 2009,
Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are
registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is
BPRN00705.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Battery Removal
01284 757500
01284 703534
SOLUTION
Plug in / turn on power
Drain inner water tank (see 7.1)
Turn off machine for three minutes
then restart it
Shade machine / draw curtains
Close doors and windows, remove
heat sources from room
Clean or replace filters
Remove blockage
Move to flat and solid ground
Wait for 3 minutes, restart the
machine when temperature normal
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SAC9000.V2 Issue No.1 19/01/10
Advertisement
