Advertisement
Assemble your Slimline II Rack
Refer to SLIMLINE II TRAY UNIVERSAL ASSEMBLY INSTRUCTION Document RRSTUNI
Fit the STRAP ON FEET
Refer to STRAP ON FOOT & STRAP ON FOOT Spacer ASSEMBLY INSTRUCTIONS DocumentS FAGO002 & FAsG002
(
)
With your Rack in the upside down position (Product sticker should be upside down), fit the Strap-on Feet
A
to your Slimline II Tray as illustrated below.
NOTE: DO NOT SLIDE THE RACK AND STRAP-ON FEET ACROSS THE ROOF! If there is a chance that you are
going to set the roof rack on to the roof, place some moving blankets and/or towels over the roof. If you
must lower the rack before it is in position, carefully set the Feet on the padded surface.
Once your Slimline II Roof Rack is fitted, ensure a 15mm clearance is maintained between the Wind
Deflector and the vehicles roof otherwise damage to the roof may occur. Bend the Wind Deflector by hand
if necessary.
REV_A01
-
-
-
(
(
2
)
)
Advertisement
