Table of Contents
Advertisement
Install requirements: Sync Bluetooth Analog Clocks
Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
Location guidelines
When identifying the install location of a Bluetooth device, the following guidelines should be followed to ensure a
device as adequate Bluetooth wireless signal strength.
• 100 ft. (30 m) when in clear-line-of sight to another Sync Bluetooth device
• 50 ft. (15.2 m) when there is 1 internal wall between Sync Bluetooth devices
• 30 ft. (9.1 m) when there are 2 internal walls between Sync Bluetooth devices
You can also measure the Bluetooth signal strength at an install location to determine if the location has adequate
signal strength.
AC-powered analog clock install guidelines
A socket-outlet is required to be available within 18 inches (45.7 cm) from the clock installation location and should be
easily accessible. Refer to the table below for power specifications.
Model
AC-powered Single-sided
AC-powered clocks are supplied with a power cord with a two-prong plug. The two-prong plug may be removed for a
hardwired (pigtail) installation. Hardwired installation requires a 120V~ power line in a junction box installed by a
licensed electrician. Leave a minimum of 6 inches (15.2 cm) of cord inside the junction box.
Battery use recommendations
Battery life expectancy is based on common operating conditions and may vary due to installed site conditions and
settings. Sync Bluetooth battery-operated clocks and repeaters have up to a five year battery life.
• Use only new high-quality name brand alkaline batteries
• Use batteries with expiration date five or more years beyond the installation date
• Use batteries with the same type and date code
• Do not use heavy duty and zinc carbon batteries as they will not last as long as high-quality name brand alkaline
batteries
• Do not use rechargeable NiCad batteries, as their output voltage is too low to assure proper operation
• Do not use standard lithium batteries
• Battery level is monitored by OneVue. Batteries should be replaced promptly upon reaching low battery status to
maintain performance and reduce the risk of battery leakage due to excess discharge.
Input Power
Current Draw
120V~, 47-63Hz
10mA@120V~
Page 6
Advertisement
Table of Contents
