Table of Contents
Advertisement
Step 2: Mount bracket kit to wall or ceiling
1.
Measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing measurements.
2.
Attach the mounting plate to the wall or ceiling using the provided anchors and screws.
3.
Slide the assembled dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the
clock bracket may be required to set the clock bracket assembly fully into place.
4.
Route the power cords as desired and apply AC power.
When a clock or repeater is powered-on, it enters Add a Clock Mode to initiate a connection to the Sync Bluetooth
mesh network.
Page 12
Advertisement
Table of Contents
