Specifications Sync Bluetooth™ Analog Clock - OneVue Sync Bluetooth Install Manual

Analog clock
Table of Contents

Advertisement

Specifications Sync Bluetooth™ Analog Clock
Battery-powered
Typical five (5) year battery life. Battery life is based on operating conditions and may vary due to installed site conditions.
models
9" (22.86 cm) model requires two C-cell alkaline batteries (not included)
12.5" (31.75 cm) and 16" (40.64 cm) models require two D-cell alkaline batteries (not included)
AC-powered models
Power Supply 100-240 VAC, 18 in. (45.72 cm) cord with plug
Single-Sided: 10mA @ 120 VAC
Bluetooth® Wireless
Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1
Communication
Bluetooth Range: up to 100 feet (30 meters)
Protocol
Operation
• Clock automatically connects daily to an available Sync Bluetooth mesh network to receive UTC time and synchronize its
time to its Time Zone offset and DST rules, downloads OneVue setting updates and send its current operating status.
• Automatically adjusts for Daylight Saving Time (DST)
• Automatically performs a daily midnight hand verification check. When check fails for three (3) consecutive days, the
clock enters a hand position failure status.
• If power is interrupted, the clock stops until power resumes. Upon resumption of power, the clock self-corrects to the
current time.
Environment
Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only
Storage Temperature Range: -4° to 158° F (-20° to 70° C)
Certifications
FCC, CE, and IC compliant
Bluetooth® SIG Certified. Reference Qualified Design 62891, 03 February 2017
Page 16

Advertisement

Table of Contents
loading

This manual is also suitable for:

B1004z

Table of Contents