Table of Contents
Advertisement
4.
Examine the mounting plate to ensure the bracket is fully engaged. The small hole in top side of the mounting plate
should be visible and fully exposed. To increase the security of the clock assembly, a common screw may be
inserted into the hole and screwed into the wall.
Step 2: Assemble clocks to bracket
Complete the steps below to assemble the clocks to the bracket.
1.
Apply power to the clock.
2.
Press and release the button located on the back of each clock to initiate its connection to a in-range Sync mesh
network to receive its time .
3.
Place the clock in to the bracket housing with the 10/11 and 4/5 numerals over the metal posts.
4.
Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place.
When a clock or repeater is powered-on, it enters Add a Clock Mode to initiate a connection to the Sync Bluetooth mesh
network.
Page 10
Advertisement
Table of Contents
