Table of Contents
Advertisement
S
ETUP
Contactless Support
Contactless
Support
Mounting the
Reader
CAUTION
NOTE
To mount the UX400
CAUTION
NOTE
NOTE
12
UX400 I
NSTALLATION
This device supports the global contactless program specifications from American
Express, MasterCard, Visa, Discover, ISIS SmartTap, and Google Wallet with
virtually no changes to existing payment hardware or software.
The UX400 is designed to be flush-mounted to the mounting surface, without
further need for any external mounting devices.
Ensure that your mounting frame has a thickness of 2 mm.
Your mounting surface may have different installation instructions. Refer to your
mounting device's user guide for further instructions.
1
Peel off the plastic liner from the front of the unit.
A
Mounting the UX400
Figure 4
2
Align the unit's stud holes with the stud holes of your mounting surface.
3
Flush-mount the reader and secure the unit with M5 nuts.
Avoid placing metallic objects at the front and around the card reader.
Use M5 mounting studs with a minimum length of 12 mm.
Tighten the nuts using a recommended tightening torque of 7.0 kgfcm.
Performance of RF devices are generally sensitive to metallic material. Metallic
panels may affect the card or mobile phone's read performance as it is
dependent on the type of fitting used (eg. type of metallic material, panel
thickness, panel opening). To achieve optimal result in such installation, please
contact Verifone for advice.
G
UIDE
B
C
Advertisement
Table of Contents
