Quick Reference - Avery Dennison FreshMarx 9415 Quick Reference Quide

Q U I C K R E F E R E N C E
This Quick Reference contains supply loading information and
general care and maintenance procedures for the FreshMarx™
AutoMarx™ 9415™ labeling system. For more detailed information,
refer to the Operator's Handbook on the documentation CD-ROM
included with your printer.
I n s t a l l i n g t h e P r i n t e r
To install the printer on the wall:
1. Select a suitable location for the printer on a wall. Leave
enough space on the left side to connect a USB drive for
updating.
2. Tape the wall mount template to the wall in the selected
location.
Caution:
3. Install the four wall anchors according to the four outside holes
indicated on the template.
4. Remove the template.
5. Lower the supply door on the printer so you can see the
mounting holes on the back of the printer.
6. Attach the printer to the wall anchors using the corresponding
holes on the back of the printer.
7. Press down firmly on the printer to lock it in place.
8. Close the supply door.
The template must be level or the printer will not
install correctly.
Mounting holes in back of printer
1