Sans Digital AccuSTOR AS424X12 Hardware Detailed User's Manual page 68

Installation Guide
7. You can also cancel the program step by type 'q'.
8. If transfer OK, the transfered data is updated. Cold-start expander (Power
cycle again) to take effect.
Example:
Update procedure, use Xmodem to transfer, refer to "fdl" command
for detail operation.
CLI> fdl { code | mfgb }
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer and
update files.
If transfer OK, the transfered data is updated. Cold-start expander (Power cycle
again) to take effect.
The following firmware and data are available in the following filename format.
1. FW file (CODE) : sas3xfwYYMMDD.fw
2. Data file (MFGB) : mfg12gYYMMDD.rom
Update SAS expander firmware:
CLI> fdl code
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer
sas3xfwYYMMDD.fw.
If transfer OK, the transfer data is updated. Cold-start expander (Power cycle
again) to take effect.
Update SAS expander data file:
CLI>fdl mfgb
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer
mfg12gYYMMDD.rom.
60