Sans Digital AccuSTOR AS424X12 Hardware Detailed User's Manual page 37

The firmware date are presented in the following filename format,
a. FW file(code):sas2xfwXXXX.fw
b. Data file(mfgb): mfgdat6gYYYY.rom
3. Firmware update procedure can be stopped by pressing Q or q.
6. Perform a cold-start after the firmware updating is completed.
7. After the firmware updating is completed, repeat steps 1-6 to update the Data
file, but change the CLI command as following.
CLI> fdl mfgb
Then use file "mfgdata.rom" to update the Datafile.
8. After both files are updated, restart the expander.
9. After restart the expander, repeat steps 1-6 to update the Code file again.
10. After both files are updated, restart the expander.
Appendix C. Command Line Interface
29