St Command - Sans Digital AccuSTOR AS424X12 Hardware Detailed User's Manual

Current SpinUp Attribute:
Drive Number: 1
Delay: 1024 ms
CLI>spin 512 3
New SpinUp Attribute:
Drive Number: 3
Delay: 512 ms
Current SpinUp Attribute:
Drive Number: 1
Delay: 1024 ms

ST Command

The st command stores system configurations in flash. Since all the revised
parameter setting is temporarily stored in the working RAM, the ST command
saves those parameters permanently in flash ROM.
1. Store temporarily configurations in flash
Syntax
CLI> st
Example:
CLI> st
CLI>
2. Store factory default configurations in flash
Syntax
CLI>st [default]
Example:
Appendix C. Command Line Interface
55